This combined sensor and controller is designed to mount directly to the heat exchanger.
It provides accurate temperature control by cycling the electric cooling fan to maintain desired oil temperature. A single housing reduces wiring and mechanical installation. The MAGHEX magnetic wand is used to set up and program the sensor. Not needed for operation. LEDs indicate the oil temperature setting.
MAGHEX Programming Wand
Consult catalog for additional sizes and technical information.
Designed to isolate damaging vibration, dampen noise and absorb thermal expansion from pumps and compressors to other related equipment. The Flexible Metal Hose is a corrosion resistant type 304 stainless steel. Connectors are carbon steel schedule 40 external NPT with hex nut attachments on both ends for easy installation. Couplings are welded to assure dependable leak free operation.
Consult catalog for additional sizes and technical information.
With two economical models to fit most applications, this float drain has a rugged zinc cast housing and is equipped with quick disconnect bowls for easy servicing.
Consult catalog for additional sizes and technical information.
These separators have 1500 through 3500 SCFM capacity. Consult factory for details on larger models through 16,000 SCFM.
Consult catalog for additional sizes and technical information.
Four models are available to fit most applications. Unique high efficiency design provides wide SCFM capacity range without loss in performance. Sturdy, lightweight aluminum construction for long dependable service. NPT threaded drain connection for installation of an electronic, manual or automatic float style drain. Low differential pressure at maximum flow ratings. Externally and internally epoxy painted for maximum corrosion protection.
Consult catalog for additional sizes and technical information.
Two Models: One has a built-in automatic float style drain, the other has a 1/8″ NPT connection with manual shut off valve. Both have a rugged cast zinc housing and are equipped with quick disconnect bowls for easy service.
Consult catalog for additional sizes and technical information.
Used to measure temperature on the primary heating pipe circuit, these low cost, simple set-up sensors are particularly suitable for automatic adjustment pumps. Operates with an immersion thermostat, measuring temperature with a liquid filled sensing element. Comes complete with waterproof protection pocket.
Sensors have a measuring range of -13 – 284 °F (-25 – 140 °C). The unit generates 2 output signals: 1 x NO + 1 x NC with separately adjustable switch points. Process connection is 1/4″ NPT. Sensor Port Adapters and optional Bulb Wells are available.
Consult catalog for additional sizes and technical information.
Sensors have a 303 stainless steel housing with a 1,000 PSI operating pressure. Normally open, sensor is closed on temperature rise. Contact rating of 6 AMPS at 120 VAC and 4 AMPS at 240 VAC.
Consult catalog for additional sizes and technical information.
The Thermostatic Temperature Controller (DC) provides accurate temperature control by cycling the cooling fan(s) to maintain desired oil temperature. Operates at 12 or 24 volts with adjustable temperature settings range from 100°F through 210°F. Temperature sensor, wiring for remote manual override and mounting hardware included. This controller was designed to mount on the cooler without requiring extensive wiring or plumbing.