This Foot Mounting Bracket is optional for BPSW and BPW Series (except 8×3 plates) and is constructed of Carbon Steel.
Used to measure temperature on the primary heating pipe circuit, these low cost, simple set-up sensors are particularly suitable for automatic adjustment pumps. Operates with an immersion thermostat, measuring temperature with a liquid filled sensing element. Comes complete with waterproof protection pocket.
Sensors have a measuring range of -13 – 284 °F (-25 – 140 °C). The unit generates 2 output signals: 1 x NO + 1 x NC with separately adjustable switch points. Process connection is 1/4″ NPT. Sensor Port Adapters and optional Bulb Wells are available.
Sensors have a 303 stainless steel housing with a 1,000 PSI operating pressure. Normally open, sensor is closed on temperature rise. Contact rating of 6 AMPS at 120 VAC and 4 AMPS at 240 VAC.
The Thermostatic Temperature Controller (DC) provides accurate temperature control by cycling the cooling fan(s) to maintain desired oil temperature. Operates at 12 or 24 volts with adjustable temperature settings range from 100°F through 210°F. Temperature sensor, wiring for remote manual override and mounting hardware included. This controller was designed to mount on the cooler without requiring extensive wiring or plumbing.
Electronic Temperature Control & Bulb Well Assembly (AC) is designed with heating or cooling modes of operation, adjustable differential, and an interchangeable temperature sensor. The control couples electronic accuracy with remote sensing capability in a NEMA 1 high-impact plastic enclosure suitable for surface or DIN-rail mounting. This is a line voltage single-stage electronic temperature control with single-pole, double-throw relay output and LED indication.